PS
Asterisks (*)
●
Settings marked with an asterisk (*) are not displayed depending on other settings.
Job Timeout(P. 478)
Print PS Errors(P. 478)
ICC Profile Settings(P. 479)
Pure Black Text(P. 483)
Black Overprint(P. 483)
Job Timeout
If the time specified in this item has elapsed since a job process was started, the machine automatically finishes the
job and receives the next job.
If you do not want to specify the timeout, specify "0 seconds."
0
to 3600 seconds
(
value
Print PS Errors
Specifies whether an error page should be printed when a PostScript error is occurring.
Off
On
(
Setting Menu List
All the settings about the PS control commands are listed with short descriptions.
Default settings are marked with a dagger ( ).
Brightness(P. 484)
Halftones(P. 484)
Composite Overprint(P. 485)
Advanced Smoothing(P. 486)
Grayscale Conversion(P. 487)
)
<PS>
<Job Timeout>
)
<PS>
<Print PS Errors>
Use the numeric keys to enter the setting
<Off> or <On>
478
0YSF-061