Performing A Quick Start Of The Machine - Canon LBP710Cx User Manual

Performing a Quick Start of the Machine

If you specify the quick startup settings, you can reduce the time from when the power switch is pressed until the
screens become operable. The way of turning OFF the power to perform a quick start of the machine is called "quick
turn-OFF."
Configuring Quick Startup Settings(P. 36)
Turning OFF the Power (Performing a Quick Turn-OFF)(P. 37)
Before Configuring Quick Startup Settings
When you are using a network
If any of the settings below is <On>, the quick start function is disabled.
● RARP, BOOTP, IPv6
● IPSec Configuring IPSec Settings(P. 301)
When you are using the MEAP function
Check whether the currently installed MEAP applications support the quick start function.
Configuring Quick Startup Settings
1
Press (
2
Use / to select <Control Menu>, and press
3
Select <Main Pwr Quick Start>, and press
4
Select <On>, and press
<Off>
Disables the Quick Start function.
<On>
Enables the Quick Start function.
5
Perform a hard reset.
➠
The settings are enabled after the hard reset is performed.
Basic Operations
Network(P. 185)
).
.
Performing a Hard Reset(P. 498)
.
.
36
0YSF-00R