Network - Canon LBP710Cx User Manual

Network

If <Network> is not displayed
● If <Network> under <Interface Selection> is set to <Off>, <Network> is not displayed in the Setup menu.
Interface Selection(P. 417)
*
Asterisks ( )
● Settings marked with an asterisk (
SD card is installed on the machine.
TCP/IP Settings(P. 378)
Mopria(P. 389)
Google Cloud Print(P. 390)
SMB(P. 390)
SNMP Settings(P. 390)
Spooler(P. 392)
Receive in Parallel(P. 393)
Wait Time at Startup(P. 393)
TCP/IP Settings
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
IPv4 Settings
Specify settings for using the machine in an IPv4 network.
IPv4
Enable or disable IPv4 in the machine.
Off
On
(
Settings>
Hard Reset(P. 498) )
IP Mode
Select how to set the IP address.
Setting Menu List
All the settings about the network are listed with short descriptions. Default settings
are marked with a dagger ( ).
*
) are not displayed depending on other settings or whether an optional
Remote UI Settings(P. 393)
Ethernet Driver(P. 394)
Sleep Mode Priority(P. 394)
IEEE802.1X(P. 395)
Address Filter(P. 395)
MAC Address(P. 396)
E-Mail Print Set.(P. 396)
Init. Network Set.(P. 397)
) <Network> Check the message
<IPv4> <Off> or <On>
Setting IPv4 Address(P. 191)
Perform a hard reset (
378
<TCP/IP Settings>
Performing a
0YSF-05F
<IPv4