Table of Contents
Advertisement
(
)
<Print Quality>
<Mode 1>
Use this setting for most environments.
<Mode 2>
Specify this setting if the internal area of high density figures, large characters, or thick lines cannot be
printed with a smooth finish.
<Mode 3>
Specify this setting when the following symptoms are observed at a time.
●
The internal area of high density figures, large characters, or thick lines cannot be printed with a smooth
finish.
●
The perimeter of low density figures, characters, or lines cannot be printed with a smooth finish.
●
Characters and lines on a solid background cannot be printed with a smooth finish.
Setting Menu List
<Sp. Smoothing Mode>
415
Select the mode
Advertisement
Table of Contents
