Connecting to a Wired LAN
Connect the machine to a computer via a router. Use a LAN cable to connect the machine to the router.
1
Connect a LAN cable.
●
Connect the machine to a router by using a LAN cable.
●
Push the connector in until it clicks into place.
2
Check that the LNK indicator (
●
When the LNK indicator does not light up.
3
Wait approximately 2 minutes.
●
While you wait, the IP address is set automatically.
●
You can set the IP address manually.
Network
) is lit.
Problems with the Wired LAN Connection(P. 542)
Setting IP Addresses(P. 190)
188
0YSF-033