Table of Contents
Advertisement
●
If the SMB settings are correctly configured, set a time value slightly longer than usual in <Wait Time at
Startup>.
Setting a Wait Time for Connecting to a Network(P. 222)
USB connection
●
Have you selected the correct port? If there is no port to use or you are not sure, reinstall the printer driver
in accordance with the Printer Driver Installation Guide. When you reinstall the printer driver, the correct
port is created automatically.
Checking the Printer Port(P. 664)
●
Is bidirectional communication enabled? Enable bidirectional communication, and restart the computer.
Checking Bidirectional Communication(P. 665)
●
Disable security software and other resident software.
●
Connect to another USB port on the computer.
●
Can you print from a USB connection to another computer? If you also cannot print from other computers,
contact your local authorized Canon dealer or the Canon help line.
Via print server
●
Can you print from the print server? If you can print from the print server, check the connection between
the print server and your computer.
Problem with the Print Server(P. 543)
●
Disable security software and other resident software.
●
Reinstall the printer driver in accordance with the Printer Driver Installation Guide.
●
Can you print from other computers via the print server? If you also cannot print from other computers,
contact your local authorized Canon dealer or the Canon help line.
You cannot print with Google Cloud Print.
Using Google Cloud Print(P. 179)
It takes a long time before printing starts.
●
Did you print to narrow width paper? After you print to narrow width paper, the machine may cool itself to
maintain the print quality. As a result, it may take some time before the next job is printed. Wait until the
machine is ready to print. Printing will resume when the temperature inside the machine has fallen.
Printing has stopped halfway.
●
Is the [
] indicator lit? If it is lit, the machine has not received a command for the print data end. If the
printing is not resumed even after a while, select <Form Feed> in the Reset menu.
Form Feed(P. 499)
●
If you cannot perform any operation, hold down the power switch for 5 seconds or more to turn OFF the
power. Wait for 10 seconds or more after you have turned OFF the power, then turn it ON again and retry
printing.
Troubleshooting
546
Advertisement
Table of Contents
