Table of Contents
Advertisement
Configuring SMB
Server Message Block (SMB) is a protocol for sharing resources, such as files and printers, with more than one device
in a network and used to register the machine as a shared printer on the SMB network.
●
SMB supports only NetBIOS over TCP/IP and does not support NetBEUI. Configure the IP address before
configuring the SMB settings.
●
SMB is enabled only when the optional SD card is installed in the machine.
1
Start the Remote UI and log on in Management Mode.
2
Click [Settings/Registration].
3
Click [Network]
4
Click [Edit].
Network
Setting IP Addresses(P. 190)
[SMB Settings].
245
Starting Remote UI(P. 336)
0YSF-03S
Advertisement
Table of Contents
