Setting Ipv4 Address - Canon LBP251 User Manual

Setting IPv4 Address

Setting IPv4 Address(P. 154)
Testing the Network Connection(P. 156)

Setting IPv4 Address

1
Press .
2
Use / to select <Network Settings>, and press
● If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Logging on to the Machine(P. 34)
3
Select <TCP/IP Settings>
4
Configure IP address settings.
<Auto Acquire>
Select to automatically assign an IP address via DHCP protocol. When <Auto Acquire: On> is displayed,
automatic addressing is enabled.
<Manually Acquire>
Select to configure the IP address settings by manually entering an IP address. In order to select this
option, <Auto Acquire> must be set to <Off>.
<Check Settings>
Select when you want to view the current IP address settings.
Automatically assigning an IP address
1
Select <Auto Acquire>
Network
The machine's IPv4 address can be either assigned automatically by a dynamic IP
addressing protocol, such as DHCP, or entered manually. When connecting the
machine to a wired LAN, make sure that the connectors of the LAN cable are firmly
inserted into the ports (
network connection if necessary.
<IPv4 Settings>
<Select Protocol>.
154
Connecting to a Wired LAN(P. 135) ). You can test the
.
<IP Address Settings>.
0W20-035
.