Canon LBP710Cx User Manual page 233

Network
Enter the IP address of a secondary DNS server, if any. You cannot enter an address that
starts with "ff" (or multicast address), the address of "0000::0000" (all zeros), or an address
that starts with "0:0:0:0:0:ffff" or "0:0:0:0:0:0".
[Use IPv4 Host/Domain Names]
Select the check box to use the same host and domain names as in IPv4.
[Host Name]
Enter up to 47 alphanumeric characters for the host name of the machine that is to be
registered to the DNS server.
[Domain Name]
Enter up to 47 alphanumeric characters for the name of the domain the machine belongs
to, such as "example.com."
[DNS Dynamic Update]
Select the check box to dynamically update the DNS records whenever the machine's IP
address is changed. To specify the type(s) of addresses you want to register to the DNS
server, select the check box for [Register Manual Address], [Register Stateful Address], or
[Register Stateless Address].
[mDNS Settings]/[DHCP Option Settings]
[Use mDNS]
Adopted by Bonjour, mDNS (multicast DNS) is a protocol for associating a host name with
an IP address without using DNS. Select the check box to enable mDNS. This check box can
only be selected when the [Use IPv6] check box is selected.
[Use Same mDNS Name as IPv4]
Select the check box to use the same mDNS name as that set in IPv4. To set a different
name, clear the check box and enter the mDNS name in the [mDNS Name] text box using
up to 63 characters.
[Acquire DNS Server Address]
Select the check box to enable Option 23 to obtain a DNS server address from the DHCP
server.
[Acquire Domain Name]
Select the check box to enable Option 24 to obtain a domain name from the DHCP server.
3
Click [OK].
5
Perform a hard reset.
● Click [Device Control], select [Hard Reset], and then click [Execute].
227