Table of Contents
Advertisement
<Off>
First the data is printed after the black text is cut out from the color background or figure, leaving the
corresponding white blank, and then the black text is printed on the white blank. The print may be fainter
than with the <On> setting, and the edges of the text may be rimmed with white.
<On>
First only the color background or figure is printed, and then the black text is printed onto the background or
figure.
Brightness
You can adjust the brightness of the whole image in steps of 5%. The smaller the value, the brighter the image.
85 to 100
to 115 (%)
(
Halftones
You can select the printing method to reproduce halftones (the intermediate range between the lighter and darker
areas of an image).
Error Diffusion
You can perform finer printing than with <Resolution/Grad.>. This print mode is suitable for sharply printing
edges of fine granularity data such as characters or thin lines.
Off
On
(
Setting Menu List
)
<PS>
<Brightness>
)
<PS>
<Halftones>
Use
/
<Error Diffusion>
484
to enter the setting value
<Off> or <On>
Advertisement
Table of Contents
