Table of Contents
Advertisement
●
Changing the paper type or environmental conditions may solve the problem of toner coming off
without necessity of changing the settings.
Incr Tail End Fixing
If only the tail end of the printed image is too dark due to insufficient fixing of toner, setting this item to <On>
may solve the problem.
Off
On
(
)
Fixing>
●
If you select <On>, the printing speed will be slower.
Reduce Ppr. Slipping
Depending on the environmental conditions, paper may not be fed correctly during printing, resulting in a
deteriorated print quality. In this case, setting this item may solve the problem. Specify the mode depending on
whether to give priority to paper sticking reduction effect or printing speed.
Mode 1
Mode 2
Mode 3
(
)
Slipping>
<Mode 1>
This mode is suitable for printing documents that contain pages where there are much text or image data.
However, the printing speed may be slower.
<Mode 2>
When printing documents whose amount of text or image data is small, selecting this mode will reduce the
degree of decrease in the printing speed as compared to <Mode 1>.
Setting Menu List
<User Maintenance>
<Off> or <On>
<User Maintenance>
Select the mode
429
<Special Print Mode>
<Special Print Mode>
<Incr Tail End
<Reduce Ppr.
Advertisement
Table of Contents
