Table of Contents
Advertisement
●
For <Offset X (2-Sided)>, first select the paper source and then adjust the print position.
Print position adjustment for 2-sided printing
●
<Offset Y (2-Sided)> and <Offset X (2-Sided)> allow you to adjust the print position on the first page (front
side). The print position on the second page (back side) will be adjusted based on the values set for each
paper source.
An example of print position adjustment
First page (front side)
Second page (back side)
6
Set a value, and press
●
Based on the printout made by Printing Position Adjustment Print, use
●
When <Offset Y (2-Sided)> is specified, the print position is adjusted by the input values for all paper sources.
●
To adjust another position or paper source, repeat steps 5 and 6.
7
Press
(
➠
The screen returns to the main screen.
8
Press
(
➠
The machine becomes online.
9
Perform the Printing Position Adjustment Print, and check the adjusted print
position on the printout.
Adjusting all print positions
You can use <Offset Y> and <Offset X> in the setting menu of the operation panel to adjust the print positions
for all types of printing regardless of the paper source. You can adjust the print position in the range of -50.0 to
+50.0 mm in 0.5 mm increments in either direction: vertical and horizontal.
Maintenance
<Offset Y (2-Sided)> setting value
<Offset Y (MP Tray)> setting value
.
).
) again.
Step 1: Printing the Current Print Position(P. 582)
585
/
to enter a value.
Offset Y/Offset X(P. 398)
Advertisement
Table of Contents
