Canon LBP710Cx User Manual page 437

Connection method selection
Select the method to connect a computer that performs the firmware update.
First Calibration
Specify the timing to automatically perform calibration after the power is turned ON. You can make this setting
separately for color mismatch correction and density control.
Color Mismatch Corr.
After Jobs
Immediately
Density Control
After Jobs
Immediately
(
<Density Control>
Type of calibration
Select the type of calibration for which you want to change the setting. <Color Mismatch Corr.> corrects color
mismatch, and <Density Control> corrects hue.
<After Jobs>
Automatically starts calibration on completion of the first print job after the power is turned ON.
<Immediately>
Automatically starts calibration immediately after the power is turned ON.
● If you select <Immediately>, it takes some time before the machine is ready to print.
Setting Menu List
) <User Maintenance>
<After Jobs> or <Immediately>
<First Calibration>
431
<Color Mismatch Corr.> or