Table of Contents
Advertisement
Presentation Layer: Choose from layer A /B/ C/ D
Template: BG+3 1,BG+3 2, Square
Channel: choose from CH.1, CH.2
H SIZE: set the horizontal pixels of output image
V SIZE: set the vertical pixels of output image
H/V Size: Set the scale ratio by putting in the horizontal width, the vertical height will be auto
adjusted according to the ratio of new width/old width.e.g. Set ratio as 1920 and the first width is
3840, the height will be automatically adjusted to 1080.
H POS: set the horizontal position of image
V POS: set the vertical position of image
RESET: If operation is not proper, turn knob to <RESET> and start over.
3.4.2 PIP Button
Press PIP Button
on the front panel under Standard system mode to open up PIP feature
(picture in picture) as follows:
>PIP
ON
Under Switch, Split, Dual,Presentation, MinDelay, PIP is not supported.
HDCP 2.X, UHD, 4K, HDR10, HLG, HDMI 2.0, DP 1.2, HDMI 2.1, DP 1.4, 6G SDI, 12G SDI, H.264, H.265
D4
User Manual
27
Advertisement
Table of Contents
