Scale Button; Pip Button - RGBlink D4 Quick Start Manual

Scale Button

Press Scale Button
1. Channel: choose from CH.1/CH.2/CH.3/CH.4
2. H SIZE: set the horizontal pixels of output image
3. V SIZE: set the vertical pixels of output image
4. Ratio: Set the scale ratio by putting in the horizontal width, the vertical height will be auto adjusted
according to the ratio of new width/old width.e.g. Set ratio as 1920 and the first width is 3840, the height will
be automatically adjusted to 1080.
5. H POS: set the horizontal position of image
6. V POS: set the vertical position of image
7. RESET: If operation is not proper, turn knob to <RESET> and start over.

PIP Button

Press PIP Button
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
on the front panel to enter scale setting menu as follows:
Channel
H Size
V Size
Ratio
H Pos
V POS
Reset
on the front panel to picture in picture setting menu as follows:
>PIP
Layer
support@rgblink.com
CH.1
3840
2160
3840
0
0
OFF
ON
Layer B
|
www.rgblink.com
17 / 20