Table of Contents
Advertisement
Adjusting the Gain
Adjust the sensitivity via the analog gain (i.e., master gain).
™ For details on gain control, see "Gain Control" (page 31) in the "Main Functions" section.
■ Manual adjustment
1
Expand [Analog Control], and set [Gain Auto] to [Off].
([Off] is the default setting.)
2
Configure the gain.
u Expand [Analog Control], and select the gain you want to configure in [Gain Selector].
• For the GO-2401M-PGE, only [Analog All] (master gain) can be configured.
• For the GO-2401C-PGE, [Analog All] (master gain), [Digital Red] (digital R gain), and [Digital
Blue] (digital B gain) can be configured individually.
v Configure the gain value in [Gain].
• [Analog All] (master gain) can be set to a value from x1 to x16 (0 dB to +24 dB). The
resolution is set in x0.01 steps (0.05 dB to 0.08 dB depending on the setting value). Values
are configured by multipliers. For example, the values set for x1 and x16 are 100 and 1600
respectively.
• For the GO-2401C-PGE, the [Digital Red] (digital R gain) and [Digital Blue] (digital B gain)
can be set to a value from x0.45 to x5.62 (–7 dB to +15 dB) the [Analog All] (master gain)
value. The resolution is set in 0.1 dB steps. Specify 0 for 0 dB, negative values for settings
below 0, and positive values for settings above 0.
Adjusting the White Balance (GO-2401C-PGE only)
Adjust the white balance using R and B gain. The white balance can also be adjusted automatically.
■ Manual white balance adjustment
1
Expand [Analog Control], and set [Balance White Auto] to [Off].
([Off] is the default setting.)
2
Select the gain to configure in [Gain Selector], and set the gain value in [Gain].
■ Automatic white balance adjustment
1
Place a white sheet of paper or similar object under the same lighting conditions as the
intended subject, and zoom in to capture the white.
White objects near the subject, such as a white cloth or wall, can also be used.
Be sure to prevent the high-intensity spot lights from entering the screen.
2
Select the [Balance White Auto] tab, and click [Continuous] or [Once] depending on your
intended application.
The white balance is automatically adjusted.
— 21 —
GO-2401M-PGE / GO-2401C-PGE
Advertisement
Table of Contents
