Preparation; Preparation Process; Step 1: Installing The Software (First Time Only) - IAI GO-2401M-PGE User Manual

Preparation

Preparation Process

Installing the Software (first time only)
Step 1
Install the software for configuring and controlling the camera (JAI SDK) on the computer.
Connecting Devices
Step 2
Connect the lens, LAN cable, AC adapter, computer, and other devices.
Verifying the Camera's Network Connection Status
Step 3
Verify whether the camera is ready for use via the LEDs at the rear of the camera.
Configuring Initial Settings for the Camera
Step 4
• Configure the output format.
• Configure settings related to the exposure and external trigger.
Adjusting the Image Quality
Step 5
• Adjust the gain and white balance.
• Adjust the exposure (shutter).
Configuring Various Other Settings
Step 6
Configure various other settings as necessary.
Saving the Settings
Step 7
Save the current setting configurations in user memory.

Step 1: Installing the Software (first time only)

When using the camera for the first time, install the software for configuring and controlling the camera
(JAI SDK) on the computer.
™ When you install JAI SDK, JAI Camera Control Tool will also be installed.
1
Download the "JAI - Getting Started Guide" and JAI SDK from the JAI website.
URL: http://www.jai.com/en/support/download-jai-software
2
Refer to the "JAI - Getting Started Guide," and install JAI SDK on the computer.
The computer will restart when installation is complete.
Note
When the JAI SDK is installed, a camera driver for the GigE interface is also part of the default installation. This
GigE Vision Filter Driver is added to every NIC/port on the host computer. As the driver is also added to the NIC/
port for Internet connection, it may, on some systems, affect Internet access speed. If you think your Internet
speed is affected, configure the following settings to disable the filter driver on that port.
u Open [Control Panel]  [Network and Internet]  [Connect to a network], and right-click the port
used for Internet connection to open the properties dialog box.






— 12 —
GO-2401M-PGE / GO-2401C-PGE