Table of Contents
Advertisement
2 RJ-45 connector
Connect a Gigabit Ethernet compatible LAN cable (Category 5e or higher, Category 6
recommended) here.
3
2
1
8
7
6
5
4
Input/
Pin No.
output
1
In/Out
2
In/Out
3
In/Out
4
In/Out
5
In/Out
6
In/Out
7
In/Out
8
In/Out
3 Power/trigger LED
Indicates the power and trigger input status.
4 ACT LED
Indicates the GigE network status.
5 LINK LED
Indicates whether the GigE network connection is 1000BASE-T or 100BASE-TX.
The specifications described in this manual, such as those for frame rate and trigger frequency, cannot be
™
met when using a 100BASE-TX connection.
LED status and camera status
LED
Power / trigger LED
ACT LED
LINK LED
Description
MX1+ (DA+)
MX1– (DA–)
MX2+ (DB+)
MX3+ (DC+)
MX3– (DC–)
MX2– (DB–)
MX4+ (DD+)
MX4– (DD–)
Light
Lit amber
Camera initializing.
Lit green
Camera in operation.
Blinking green
During operation in trigger mode, trigger signals are being
input.
™ The blinking interval is not related to the actual input interval
of the external trigger.
Lit amber
GigE network communication not established.
Blinking amber
GigE network communication in progress.
Lit green
1000BASE-T connection established.
Blinking green
100BASE-TX connection established.
— 9 —
GO-2401M-PGE / GO-2401C-PGE
Status
Advertisement
Table of Contents
