Table of Contents
Advertisement
Item
n) JAI Custom Control Shading
Shading Correction Mode
Shading Mode
Perform Shading Calibration
Shading Detect Result
o) JAI Custom Control
Sequence ROI
Video Send Mode Selector
Sequence Roi Index
Sequence Roi Frame
Count
Sequence Roi Next Index
Sequence Roi Width
Sequence Roi Height
Sequence Roi Offset X
Sequence Roi Offset Y
Sequence Roi Gain
(GO-2401M-PGE only)
Sequence Roi Gain All
(GO-2401C-PGE only)
Sequence Roi Gain Red
(GO-2401C-PGE only)
Sequence Roi Gain Blue
(GO-2401C-PGE only)
Sequence Roi Exposure
Time
Sequence Roi Black Level
Sequence Lut enable
Sequence Roi H Binning
(GO-2401M-PGE only)
Sequence Roi V Binning
(GO-2401M-PGE only)
Sequence Repetition
Command Sequence Index
Current Sequence Index
Sequence LUT Mode
Reset Sequence Index
Setting range
GO-2401M-PGE:
Flat Shading (fixed)
GO-2401C-PGE:
Flat Shading, Color
Shading
Off, User 1, User 2, User 3
—
—
Normal Mode, Trigger
Sequence Mode, Command
Sequence Mode, Multi Mode
Index 1 to 128
1 to 255
Index 1 to 128, Off
16 to 1936
GO-2401M-PGE: 1 to 1216
GO-2401C-PGE: 2 to 1216
—
—
100 to 1600
100 to 1600
–4533 to 37876
–4533 to 37876
73 to 8000000
0 to 255
Off, On
1 to 2
1 to 2
1 to 255
Index 1 to 128
Gamma, LUT
—
— 51 —
GO-2401M-PGE / GO-2401C-PGE
Default value
Configure shading correction settings.
Flat Shading
Select the shading correction mode.
Off
Select whether to use shading correction.
When using the function, select the user
area to which to save the shading
correction value.
—
Execute shading correction. After
execution, the shading correction value is
automatically saved to the selected user
area.
—
Display the shading detection results.
Configure settings for JAI sequence ROI.
Normal Mode
Select the video send mode.
Index 1
Select the sequence ROI index table.
1
Set the frame count.
Index 1
Select the next index.
When [Off] is selected, sequence
operation will stop with this index.
1936
Set the width.
1216
Set the height.
0
Set the horizontal position.
0
Set the vertical position.
100
Set the gain value.
100
0
0
18000
Set the exposure time.
0
Set the black level.
Off
Set whether to enable the LUT.
1
Set the number of pixels in the horizontal
direction for which to perform binning.
1
Set the number of pixels in the vertical
direction for which to perform binning.
1
Set the repeat count for the sequence.
Index 1
Set the sequence index command.
Index 1
Display the current sequence index table.
Gamma
Set the sequence LUT mode.
—
Reset the sequence index table.
Description
Advertisement
Table of Contents
