Table of Contents
Advertisement
Item
Black Level Selector
Black Level
Gain Auto
Balance White Auto
(GO-2401C-PGE only)
Gamma
JAI LUT Mode
f) LUT Control
LUT Selector
(GO-2401C-PGE only)
LUT Index
LUT Value
g) Digital IO Control
Line Selector
Line Mode
Line Inverter
Line Status
LineSource
Source Format
User Output Selector
User Output Value
h) Pulse Generators
Clock Pre-scaler
Pulse Generator Clock (MHz)
Setting range
GO-2401M-PGE: Digital All
GO-2401C-PGE: Digital All,
Digital Red, Digital Blue
Digital All: –133 to 255
Digital Red & Blue:
–133 to 255 (color only)
Off, Continuous
Off, On
0.45, 0.60, 1.0
Off, Gamma, LUT
R, G, B
GO-2401M-PGE: 0 to 255
GO-2401C-PGE: 0 to 255
0 to 4095
Line2 - Opt Out 1,
Line3 - Opt Out 2,
Line5 - Opt In 1,
Time Stamp Reset,
NAND Gate 0 In 1,
NAND Gate 0 In 2,
NAND Gate 1 In 1,
NAND Gate 1 In 2
—
True, False
—
Low, High,
Acquisition Trigger Wait,
Frame Trigger Wait,
Frame Active,
Exposure Active,
FVAL,
User Output 0,
User Output 1,
Line 5 - Opt In 1,
Pulse Generator 0,
Nand 0 Out, Nand 1 Out
—
User Output 0,
User Output 1
True, False
1 to 4096
0.018127 to 74.25
— 47 —
GO-2401M-PGE / GO-2401C-PGE
Default value
Digital All
Select the black level to configure.
(master black)
0
Set the black level value.
Off
Enable/disable gain auto adjustment.
Off
Enable/disable auto white balance.
0.45
Set the gamma value.
Off
Select the JAI LUT mode.
Configure LUT settings.
R
Select the LUT channel to control.
0
Set the LUT index table number.
0
Set the LUT value.
Configure settings for digital input/output.
Line2 - Opt Out 1
Select the input/output to configure.
Output
Display the input/output status (whether it
is input or output).
False
Enable/disable polarity inversion for the
selected input signal or output signal.
True
Display the status of the input signal or
output signal (True: High, False: Low).
Low
Select the line source signal for the item
selected in [Line Selector].
Opto Coupled
Display the current I/F type.
User Output 0
Set the user output signal.
False
Configure pulse generator settings.
1
Set the division value for the prescaler
using the pixel clock as the base clock.
74.25
Set the clock value (MHz) for the pulse
generator.
Description
Advertisement
Table of Contents
