Table of Contents
Advertisement
Item
p) JAI Custom Control MultiROI
Multi Roi Index
Multi Roi Width
Multi Roi Height
Multi Roi Offset X
Multi Roi Offset Y
Multi Roi Index Max
q) Counter And Timer Control
Counter 0 to 2
Counter 0 to 2 Event
Source
Counter 0 to 2 Event
Activation
Counter 0 to 2 Reset
Counter 0 to 2 Refresh
Counter 0 to 2 Value
Counter 0 to 2 Status
r) JAI Custom control features
Misc.
Video Process Bypass
Mode
Dark Compression
AWB Area Selector
(GO-2401C-PGE only)
AWB Area Enable
AWB Control Speed
Binning Gain Enable
(GO-2401M-PGE only)
OptIn Filter Selector
Setting range
Index 1 to 5
16 to 1936/16 steps
GO-2401M-PGE:
1 to 1216/1 step
GO-2401C-PGE:
2 to 1216/2 steps
0 to 1920/16 steps
❖ maximum value
= 1936 - width value
GO-2401M-PGE:
0 to 1215/1 step
GO-2401C-PGE:
0 to 1214/2 step
❖ maximum value
= 1216 - height value
1 to 5
Counter 0 to 2
Off, Frame Trigger,
Frame Start,
Exposure Start,
Exposure Transfer End
Rising Edge (fixed)
—
—
—
—
On, Off
Linear, Dark Compression
Low Right to High Left
True, False
1 to 8
Off, On
10 us, 100 us, 500 us, 1 ms,
5 ms, 10 ms
— 52 —
GO-2401M-PGE / GO-2401C-PGE
Default value
When using the JAI Multi ROI function, set
the scanning area.
Index 1
Set the Multi ROI index table.
1936
Set the width. When binning is enabled
on the GO-2401M-PGE, the maximum
value will change.
1216
Set the height. When binning is enabled
on the GO-2401M-PGE, the maximum
value will change.
0
Set the horizontal position. When binning
is enabled on the GO-2401M-PGE, the
maximum value will change.
0
Set the vertical position. When binning is
enabled on the GO-2401M-PGE, the
maximum value will change.
1
Set the Multi ROI index count.
Configure counter settings. (This camera
only supports counter functions.)
—
Select the counter.
Off
Select the counter event signal for which
to read the count value.
Rising Edge
Specify the timing at which to count.
—
Reset the counter.
—
Update the count value.
0
Display the count value.
Counter Active
Display the counter status.
Configure settings for other JAI functions.
Off
Enable / disable video process bypass
mode.
Linear (no
Set whether to compress signals for dark
compression)
areas.
Low Right
Select from the 16 metering areas for
AWB individually.
False
Enable (True) / disable (False) the
selected AWB metering area.
4
Select the AWB reaction speed. (for
continuous)
On
Enable/disable gain binning.
10 us
Select the surge protection filter.
Description
Advertisement
Table of Contents
