Adjusting The Black Level; Step 6: Configuring Various Other Settings; Step 7: Saving The Settings - IAI GO-2401M-PGE User Manual

Adjusting the Black Level

1
Expand [Analog Control], and select the black level you want to configure in [Black Level
Selector].
For the GO-2401M-PGE, only [Digital All] (master black) can be configured.
For the GO-2401C-PGE, [Digital All] (master black), [Digital Red] (digital R), and [Digital Blue]
(digital B) can be configured individually.
2
Specify the adjustment value in [Black Level].

Step 6: Configuring Various Other Settings

See "Settings List" (page 45) and configure settings as necessary.

Step 7: Saving the Settings

The setting values configured in Control Tool will be deleted when the camera is turned off. By saving
current setting values to user memory, you can load and recall them whenever necessary. You can
save up to three sets of user settings (User Set1 to 3) in the camera.
Note
Changes to settings are not saved to the computer (Control Tool).
User memory Temporary memory
User Set1
User Set2
Save
User Set3
— 22 —
GO-2401M-PGE / GO-2401C-PGE
Current
setting
values
Control Tool