2
Technology > Fixing System > Overview > Specifications
Fixing System
Overview
■ Features
This machine introduces the on-demand fixing method.
Separation guide
Fixing heater
Fixing film
2
Technology > Fixing System > Overview > Specifications
Fixing delivery roller
Fixing inlet guide
Pressure roller
■ Specifications
Item
Fixing method
On-demand fixing
Fixing speed
Cassette feeding
Manual feeding
Fixing heater
Ceramic heater
Control temperature
Cassette feeding
Manual feeding
Temperature
By the main thermistors and the sub thermistors (front) and (rear)
detection
Cleaning control
Cleaning sequence control
Edge heat rising
Paper edge cooling fans (front)/(rear) and sequence control
prevention control
Fixing loop control
Loop sensor
Protective Function
Main thermistor and Sub thermistors (front)/(rear)
Thermo Switch (operating temperature: 250 deg C)
*1. Target temperature is specified depending on the fixing mode and the fixing temperature
at the start of warm-up control.
F-2-70
2-44
Function/method
233mm/sec (1/1-high speed: 0.8% speed-up)
230mm/sec (1/1-speed)
224mm/sec (1/1-slow speed: 3.1% speed-down)
139mm/sec (1/1-high speed: 0.8% speed-up)
137mm/sec (1/1-speed)
133mm/sec (1/1-slow speed: 3.1% speed-down)
225 deg C (plain paper) *1
180 deg C (plain paper) *1
2-44
T-2-27