Line Spacing; Form Length Set - Printronix P9212 Setup Manual

Line Spacing

The Line Spacing feature sets the number of lines to be printed per inch (lpi).
At 6 lpi, for example, print lines are spaced 1/6-inch apart.
•
Set At 6 LPI
•
Set At 8 LPI
•
Set At 10.3 LPI

Form Length Set

The Form length feature sets the number of lines that can be printed on a
page. You can set form length in inches or in print lines per page, at either 6
or 8 lines per inch (lpi).
You should set only one of the following three values, as changing one value
automatically changes the other two:
•
In Inches: Set this value to the length of the form in inches, but only if
the length is evenly divisible by 1/2 inch. You can choose from 1 to 24
inches in 1/2 inch increments (for example, select 11 for 8 1/2" X 11"
paper).
•
In 6 LPI Lines: Set this value to the number of lines to be printed on
each form. The form length must be evenly divisible by 1/6 inch. You
can choose from 1 to 192 lines (for example, select 66 lines for an
11-inch form).
•
In 8 LPI Lines: Set this value to the number of lines to be printed on
each form. The form length must be evenly divisible by 1/8 inch. You
can choose from 1 to 192 lines (for example, select 88 lines for an
11-inch form).
Configuring the Printer 3–43