Test The Printer - Printronix P9212 Setup Manual

Test the Printer

Step
1.
The printer should be turned on and loaded with paper and ribbon. The top cover should be raised and
the control panel display should read "Off-Line Ready."
2.
Press:
3.
4.
5.
6.
7.
8.
To start the ENTER
test, press:
2–22
Press Result
ENTER Switch
+
Not Locked
Ribbon Life
Diagnostics
Configuration
Printout
Printer Test
UNTIL
Full Width
Printer Test
8 Inch Width
Printer Test
Shift Recycle
Running Test
Shift Recycle
Press both keys at the same time.
Unlocking the ENTER key
allows you to test your printer.
Press " until you reach the
appropriate test, for wide paper
(132 columns) or for narrow
OR
paper (80 columns).
Prints shifted lines of the current
character set across the paper
(either 80 or 132 columns).
Setting Up the Printer
Notes