Uppercase Select; Printer Select - Printronix P9212 Setup Manual

Uppercase Select

The Uppercase Select parameter controls how the printer handles lowercase
characters it receives from the host computer.
•
Upper & Lower: The printer prints lowercase characters received
•
Uppercase Only: The printer prints lowercase characters received
NOTE: The Uppercase Select parameter is available only when the P-Series

Printer Select

The Printer Select parameter allows you to use control codes DC1 (on) and
DC3 (off) to cause the printer to interpret or ignore data sent from the host
computer.
•
Disable:
•
On=DC1/Off=DC3:
NOTE: The Printer Select parameter is available only when the Serial
Configuring the Printer
from the host computer as lowercase, and uppercase
characters received from the computer as uppercase.
from the host computer as their corresponding
uppercase equivalents; uppercase characters received
from the computer are printed as uppercase.
XQ Printer Protocol has been selected.
Turns off the Printer Select feature. DC1 and
DC3 control codes have no effect on the printer.
Turns on the Printer Select feature. When the
printer receives a DC3 control code from the
host computer, the printer discards all host data
following the DC3 until it receives a DC1
control code. When the printer receives a DC1
from the host, the printer processes all host data
following the DC1 until it receives a DC3.
Matrix Printer Protocol has been selected.
3–35