Step
11.
12.
13.
Continue this pattern to make other changes.
14.
All changes remain in memory until you turn the printer off. If you want to save these changes as a
configuration that is stored in memory and can later be loaded, go to page 3–18. If you want to
use—but not save—these settings, continue with the following steps.
15.
16.
17.
Close the printer cover.
18.
3–16
Press
OR
ENTER
CLEAR
+
ON LINE
Result
Line Spacing
Set at X LPI *
Line Spacing
Set at 8 LPI *
Off–Line
Ready
1
ENTER Switch
Locked
On–Line
(Current Font)
1
Notes
Cycle through the values
(6, 8, or 10.3 LPI).
Selects the displayed value.
Asterisk (*) appears,
indicating this value is
active.
Prevents settings from
being changed.
Places the printer on-line,
ready for normal operation.
Configuring the Printer
Need help?
Do you have a question about the P9212 and is the answer not in the manual?