Printronix P9212 Setup Manual page 60

Step
1.
Verify you have made all of the necessary changes to your current configuration. Return to the
top of the menu.
2.
3.
4.
5.
6.
To make a printout of your configuration, go to page 3–12, step 4. If you decide not to print the
configuration, then continue with the following steps.
7.
8.
Close the printer cover.
9.
3–18
Press
Ribbon Life
Save Parameters
UNTIL
X
ENTER
Save Parameters
Values Saved
CLEAR
Off–Line
Ready
ENTER Switch
+
Locked
ON LINE
On–Line
(Current Font)
Result
X = the current
configuration.
Displays for about one
second. The printer has
stored the new parameters
in NVRAM as power-up
default values.
X = the current
configuration.
X
Prevents settings from
being changed.
Places the printer on-line,
ready for normal operation.
X
Notes
Configuring the Printer