Printronix P9212 Setup Manual page 62

Step
1.
Press:
2.
Raise the printer cover.
3.
4.
5.
6.
7.
8.
Factory parameters are loaded only into Configuration 1, not saved. If you turn
the printer off and then on, the saved Configuration 1 values will be restored.
9.
3–20
Press
ON LINE
Off–Line
Ready
ENTER Switch
+
Not Locked
Ribbon Life
Load Parameters
UNTIL
Load Saved
Parameters 1
Load Factory
UNTIL
Parameters
ENTER
Load Factory
Completed
IMPORTANT
CLEAR
Off–Line
Ready
Result
The printer must be off-line
1 to load a configuration.
Unlocking the ENTER key
allows you to load a
configuration.
First of series.
Press the key until you reach
the appropriate parameter set
(IGP, IBM 3287, IBM 5225,
or Factory).
Displays for about one
second (message varies,
depending on the parameter
set you are loading). The
printer loads the requested
parameters.
1
Notes
Configuring the Printer