Save Parameters Menu Options
You can save up to four configurations to meet different print job
requirements. A configuration consists of several parameters. They will be
saved into the currently loaded configuration (1, 2, 3, or 4). (Also see
"Saving Your New Configuration" on page 3–17.)
The parameters are stored in non-volatile memory (NVRAM), so they are not
lost if you turn off the printer. NVRAM is divided into four blocks, each of
which stores a different configuration.
Save
Parameters 1
(From page 3–25)
Press ENTER
to save the
parameters
3–66
Figure 3–15. Save Parameters Menu
B
To view options, press:
DOWN
Y
UP
"
RIGHT
A
LEFT
To select an option, press ENTER
To exit configuration (returning to
Off–Line Ready), press CLEAR
*
= Factory Default
Configuring the Printer