Setting Ribbon Size - Printronix P9212 Setup Manual

Setting Ribbon Size

Follow this procedure when first setting up RibbonMinder parameters or if
you are changing the ribbon to a different length of ribbon.
Changing the ribbon size always resets the new Ribbon Life value to 100%.
Step
1.
ON LINE
2.
Raise the printer cover.
3.
4.
5.
6.
7.
8.
6–8
Press Result
Off–Line
Ready
+
ENTER Switch
Not Locked
Ribbon Life
Ribbon Life
New Ribbon
Ribbon Life
UNTIL
Set Ribbon Size
Currently xxx
New Size xxx*
Currently xxx
UNTIL
New Size (Desired value)
Notes
The printer must be off-line to
xxx%
1
change the configuration.
Press both keys at the same time.
Unlocking permits configuration
changes.
xxx%
xxx%
xxx%
Press " or A until you reach
the appropriate ribbon size
(standard ribbon is 60 yards
long).
RibbonMinder