Printronix P9212 Setup Manual page 73

Figure 3–7 shows the Character Set Menu. This menu defines which
character code or symbol set the printer uses, including bar code character
sets.
There are four possible character sets from which to choose: IBM PC,
Multinational, ECMA-94 Latin 1, and DEC Multinational. Each of these
character sets has several additional choices for language. In addition, the
language choices for the IBM PC character set and for the ECMA-94 Latin 1
character set are further subdivided into a primary and an extended subset, as
shown in the figure.
As an example, pressing the B key from the Character Set menu will display
"Select Set IBM PC". Pressing " twice selects the ECMA-94 Latin 1 set. If
you then press the B key, your choices will be either the "Primary" or
"Extended" subset. If you press " to select "Extended", followed by the B
key, your choices will be: "Multinational", "Barcode DP 10", and so on,
through "Scient. NLQ 10". Press the " and A keys until the display shows
the choice you want, then press ENTER to select that choice.
Refer to the Programmer's Reference Manual for character set charts.
NOTE: DOWNLOADED is displayed when a downloaded substitution
table is active.
Configuring the Printer 3–31