Dimensions - ATTO Technology FibreBridge 2370E Installation And Operation Manual

A bicolor Ready/Fault LED lights green to indicate
ready, lights yellow to show a faulted condition, and is
off to indicate not ready.
Embedded in the Ethernet port connector: a
lighted green LED shows a valid link; off indicates that
no link is present. A separate blinking yellow LED
indicates activity.
Fibre Channel port: a lighted green LED indicates
link; off means no link. A separate green LED
indicates activity if it is lit, no activity if it is off.
SCSI ports: a green LED on each port indicates
activity if is lit.
Exhibit 1.2-1 FibreBridge 2390R/D dimensions with front panel LEDs and connector side details
R eady, F ault LE D s
S erial port
FC A ctivity, Link LE D s
E thernet port Fibre C hannel port
R eset sw itch
LEDs on the front panel are:
A bicolor Ready/Fault LED is lighted green to
indicate ready, lighted yellow to show a faulted
condition, and off indicates not ready.
SCSI ports: a green LED on each port indicates
activity if is lit.
Fibre Channel port: bicolor LED indicates FC
speed. If it is off, speed is 1-Gb; if it is green, 2-Gb, and
yellow indicates 4-Gb FC. A separate green LED
indicates activity if it is lit, no activity if it is off.
S C S I A ctivity LE D s
S C S I ports P ow er receptacle
6