Sip Settings - Yeastar Technology TA400 User Manual

Table 5-3 Description of Dial Pattern Template Settings
Items Description
Template ID The ID for this template.
Template Name A name for this template.
Calls from the FXS port should match the dial pattern set on this
template, or the call cannot be established. Hover the pointer
Dial Pattern
over
Allows the user to specify the number of digits that will be stripped
Strip
from the front of the phone number before the call is placed.
The digits will be appended to the phone number before the call is
Prepend
placed.
Set default mode for sending DTMF of this trunk. Default setting:
DTMF Mode
rfc2833.
Codec Define the codec for this sip trunk and its priority.

SIP Settings

It is wise to leave the default setting as provided on this page. However, for a few
fields, you need to change them to suit your situation.
1) General
to read tips.
Figure 5-4 SIP General Settings
TA400/800 User Manual
21/64