Download
Share
Print this page
Yeastar Technology NeoGate TA3200 How To Connect
  1. Manuals
  2. Brands
  3. Yeastar Technology Manuals
  4. Gateway
  5. NeoGate TA3200
  6. How to connect

Yeastar Technology NeoGate TA3200 How To Connect

How to connect trixbox to neogate ta fxs gateway
Hide thumbs Also See for NeoGate TA3200:

Advertisement

Quick Links

Download this manual
How to Connect Trixbox to
NeoGate TA FXS Gateway
Version 1.0
Date: 2014.06.06
Yeastar Information Technology Co. Ltd

Advertisement

loading

Related Manuals for Yeastar Technology NeoGate TA3200

Summary of Contents for Yeastar Technology NeoGate TA3200

  • Page 1 How to Connect Trixbox to NeoGate TA FXS Gateway Version 1.0 Date: 2014.06.06 Yeastar Information Technology Co. Ltd...
  • Page 2 How to Connect Trixbox to NeoGate TA FXS Gateway Table of Contents: 1. Introduction ..................3 2. Preparation ..................3 3. VoIP Mode .................... 4 4. SPS/SPX Mode ..................8 2/15...

  • Page 3: Introduction

    3. Make external calls from the analog phones using trunks on Trixbox. Description： IP address of Trixbox: 192.168.5.236 IP address of NeoGate TA3200: 192.168.5.13 Figure 1. Connect Trixbox and NeoGate TA3200 2. Preparation NeoGate TA3200 attempts to contact a DHCP server in your network to obtain 3/15...

  • Page 4: Voip Mode

    (e.g., the IP address, subnet mask, default gateway address and DNS address) by default. Before connect NeoGate TA3200 to Trixbox, you need to set a static IP address from the same LAN with the Trixbox. Steps to set static IP for NeoGate TA3200: 1.
  • Page 5 How to Connect Trixbox to NeoGate TA FXS Gateway Trixbox. Figure 3. Connect TA3200 and Trixbox via VoIP Mode Step 1. Create a SIP extension on Trixbox. Path: PBX→Extensions→Add Extension Create an extension on Trixbox for the FXS port on the TA3200 which has connected an analog phone.
  • Page 6 How to Connect Trixbox to NeoGate TA FXS Gateway Figure 4. Create Extension 300 on Trixbox Step 2. Configure one VoIP server template on NeoGate TA3200. Path: Gateway→VoIP Settings→VoIP Server Settings Check "Enable Register", fill in the Trixbox's IP address, this VoIP server template will be a VoIP mode template.
  • Page 7 How to Connect Trixbox to NeoGate TA FXS Gateway Figure 6. Edit Dial Pattern Template Step 4. Edit the FXS port Path: Gateway→FXS Port List→FXS Port List Figure 7. Edit the FXS Port Number: the extension number as the one you created on Trixbox, 300. Primary Server: choose Trixbox(1), the VoIP server template configured in Step 2.

  • Page 8: Sps/Spx Mode

    Trixbox all should match the dial pattern, or calls will be failed. 4. SPS/SPX Mode If you choose this mode to connect NeoGate TA3200 and Trixbox, the FXS port will be registered as a Service Provider SIP/IAX (SPS/SPX) trunk to the Trixbox.
  • Page 9 How to Connect Trixbox to NeoGate TA FXS Gateway Step 1. Create a Service Provider SIP Trunk on Trixbox Path: PBXTrunksAdd SIP Trunk Figure 10. Add SIP Trunk 9/15...
  • Page 10 How to Connect Trixbox to NeoGate TA FXS Gateway Figure 11. Configure SIP Trunk PEER Details: host=192.168.5.13 type=peer qualify=yes disallow=all context=from-trunk allow=ulaw,alaw,gsm After creating the SIP trunk, we can check the status of this trunk, it should be Path: PBXPBX SettingsToolsSystem AdministrationAsterisk CLI Enter the command “sip show peers”...
  • Page 11 How to Connect Trixbox to NeoGate TA FXS Gateway seen. Figure 12. SIP Trunk Status Step 2. Edit one VoIP Server template as SPS mode. Path: Gateway→VoIP Settings→VoIP Server Settings Do not check "Enable Register", choose SIP protocol, and fill in the Trixbox IP address, the VoIP server template will be configured as SPS mode.
  • Page 12 How to Connect Trixbox to NeoGate TA FXS Gateway Step 3. Edit the Dial Pattern Template Path: Gateway→VoIP Settings→VoIP Server Settings The default dial pattern is set as ".", which allows you to dial any number out. In this guide, we will remain the default setting. You can change it according to your environment.
  • Page 13 Choose the inbound destination as IVR, when you call in Trixbox from NeoGate TA3200, you will hear the IVR prompt. The inbound route configured here match DID number 9999, users from NeoGate TA3200 should dial 9999 to reach Trixbox. 13/15...
  • Page 14 How to Connect Trixbox to NeoGate TA FXS Gateway Figure 17. Add Incoming Route 14/15...
  • Page 15 How to Connect Trixbox to NeoGate TA FXS Gateway Step 5. Create one outbound route on Trixbox. To make calls from Trixbox to NeoGate TA3200, you need to create one outbound route on Trixbox. Path: PBX→PBX Settings→Outbound Routes→Add Route Figure 18. Add Outbound Route Set the dial pattern as X., choose the trunk "NeoGate_TA3200"...