Dial Pattern Template; Sip Settings - Yeastar Technology TA1600 User Manual

4.2.2 Dial Pattern Template

Dial pattern template specifying how to route the calls from FXS ports to VoIP server
extensions or external numbers. The number of dial pattern templates is limited by the
number of ports each TA FXS Gateway model has.
Table 4-5 Description of Dial Pattern Template Settings
Items Description
Template ID The ID for this template.
Template Name A name for this template.
Calls from the FXS port should match the dial pattern set on this
template, or the call cannot be established. Hover the pointer over
Dial Pattern
Allows the user to specify the number of digits that will be stripped
Strip
from the front of the phone number before the call is placed.
The digits will be appended to the phone number before the call is
Prepend
placed.
Set default mode for sending DTMF of this trunk. Default setting:
DTMF Mode
rfc2833.
Codec Define the codec for this sip trunk and its priority.

4.2.3 SIP Settings

This is the SIP settings in TA FXS Gateway, including General settings, NAT, Codecs,
Qos, Response Code, T.38, and advanced settings.
1) General
TA1600/2400/3200 FXS Gateway User Manual
Figure 4-11 Dial Pattern Template
to read tips.
41/60