Radius Settings - Yeastar Technology TA400 User Manual

configure the tone zone settings on TA FXS Gateway:
http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
Items
Country/Region
Ring Cadence
Dial Tone
Ringback Tone
Busy Tone
Call-Waiting Tone
Congestion Tone
2nd Dial Tone
Message Tone
VoiceMail Tone

RADIUS Settings

TA FXS Gatewaysupports RADIUS (Remote Authentication Dial In UserService)
protocol. RADIUS feature is mainly for billing purpose on TA FXS Gateway. There
areprimary and secondary RADIUS server configurations available. Once the primary
server is unreachale, the RADIUS requests will be sent to the secondary server.
Figure 8-3 Customize Tones
Table 8-1 Description of Tone Zone Settings
Description
Choose the country to get pre-programmed tone zone settings or
choose "User custom for Tone Zone" to configure the settings
manually.
Configuration option for all FXS ports ring cadence for all
incoming calls.
Prompt tone of off-hook dial tone.
The tone sent to caller when ringing is on.
Used for busy line prompt.
Used for notification in call waiting.
Used to indicate that an invalid code has been dialed, or that all
circuits (trunks) are busy and/or the call is unroutable.
Used for the second stage dial tone.
Used for message tone.
Used for voicemail tone.
TA400/800 User Manual
36/64