Sip Settings - Yeastar Technology NeoGate TB400 User Manual

Table 4-7 Description of Service Provider Trunk Settings
Items
Trunk Type
Provider Name
Hostname/IP

4.2.2 SIP Settings

This is the SIP settings in NeoGate, including General settings, NAT, Codecs, QoS,
Response Code, T.38, and advanced settings.
1) General
Items
UDP Port
TCP Port
TLS Port
Figure 4-10 Service Provider Trunk Settings
Description
Choose the type of trunk, "Service Provider".
A unique label to help you identify this trunk when listed in
outbound rules, incoming rules etc. E.g. "yeastar".
Service provider's hostname or IP address.
Note:
5060 is the standard port number used by SIP
protocol. Don't change this part if it is not required.
Figure 4-11 SIP General Settings
Table 4-8 Description of SIP General Settings
Description
Port used for SIP registrations. The default is 5060.
Port used for SIP registrations. The default is 5060.
Port used for SIP registrations. The default is 5061.
NeoGate TB400 User Manual
29/40