Yeastar Technology TA400 User Manual page 22

Items
UDP Port
Enable Random Port
Random Port Update
Interval
TCP Port
TLS Port
TLS Verify Server
TLS Verify Client
TLS Ignore Common
Name
TLS Client Method
RTP Port Start
RTP Port End
DTMF Mode
Max
Registration/Subscription
Time
Min
Registration/Subscription
Time
Default Incoming/Outgoing
Registration Time
Register Attempts
Register Timeout
Calling Channel Codec
Priority
Video Support
Max Bit Rate
DNS SRV Look Up
Table 5-4 Description of SIP General Settings
Description
Port used for SIP registrations. The default is 5060.
Enable or Disable Random SIP port.
Set the Random Port Update Interval.
Port used for SIP registrations. The default is 5060.
Port used for SIP registrations. The default is 5061.
When using TA FXS Gateway as a TLS client, whether
or not to verify server's certificate. It is ―No‖ by default.
When using TA FXS Gateway as a TLS server, whether
or not to verify client's certificate. It is ―No‖ by default.
Set this parameter as ―No‖, then common name must be
the same with IP or domain name.
When using TA FXS Gateway as TLS client, specify the
protocol for outbound TLS connections. You can select
it as tlsv1, sslv2 or sslv3.
Beginning of the RTP port range.
End of the RTP port range.
Set the default mode for sending DTMF. Default setting:
rfc2833
Maximum duration (in seconds) of a SIP registration.
The default is 3600 seconds.
Minimum duration (in seconds) of a SIP registration.
The default is 60 seconds.
Default Incoming/Outgoing Registration Time: the
default duration (in seconds) of incoming/outgoing
registration.
The number of SIP REGISTER messages to send to a
SIP Registrar before giving up. The default is 0 (no
limit).
Number of seconds to wait for a response from a SIP
Registrar before classifying the register has timed out.
The default is 20 seconds.
Once enabled, when dialing out via SIP/SPS trunks, the
codec of calling channel will be selected preferentially. If
not, TA FXS Gateway will follow the priority order in
your SIP/SPS trunks.
Support SIP video or no. The default is yes.
Configure the max bit rate for video stream. The default:
384kb/s.
Please enable this option when your SIP trunk contains
TA400/800 User Manual
22/64