Sip Settings - Yeastar Technology TB200 User Manual

Table 4-7 Description of Service Provider Trunk Settings
Items
Trunk Type
Provider Name
Hostname/IP

4.2.2 SIP Settings

This is the SIP settings in TB200/400, including General settings, NAT, Codecs, QoS,
Response Code, T.38, and advanced settings.
1) General
Items
UDP Port
TCP Port
TLS Port
TLS Verify Server
TLS Verify Client
Description
Choose the type of trunk, "Service Provider".
A unique label to help you identify this trunk when listed in
outbound rules, incoming rules etc. E.g. "yeastar".
Service provider's hostname or IP address.
Note:5060 is the standard port number used by SIP
protocol. Don't change this part if it is not required.
Figure 4-11 SIP General Settings
Table 4-8 Description of SIP General Settings
Description
Port used for SIP registrations.Thedefaultis 5060.
Port used for SIP registrations. The default is 5060.
Port used for SIP registrations. The default is 5061.
When using TB200/400 as a TLS client, whether or not to
verify server's certificate. It is "No" by default.
When using TB200/400 as a TLS server, whether or not to
verify client's certificate. It is "No" by default.
TB200/400 User Manual
28/39