Yeastar Technology TA400 User Manual page 19

Check VoIP settings below.
 General
Table 5-1 Description of VoIP Server General Settings
Items Description
Server ID The ID for the VoIP server template.
Server Name The name for the VoIP server template.
Type Choose the type of the VoIP server, SIP or IAX.
This will be the transport method used by the SIP Trunk. This
Transport method is given by the SIP trunk provider. The options are UDP
(default),TCP ,and TLS.
VoIP server hostname or IP address.5060 is the standard port
number used by SIP protocol. Don't change this part if it is not
Hostname/IP
required.
Domain VoIP server hostname. An IP address also can be filled here.
Enable A proxy that receives requests from a client. Even though it may
Outbound not be the server resolved by the Request-URI.
Proxy Server
Failover Set the failover server. This server will be used if the primary
Hostname/IP server is unavailable.

Register Mode

Figure 5-2 Template Register
Port Register: ports will register to this server with individual
accounts.
Template Register: ports will register to this server with the
TA400/800 User Manual
19/64