Vlan Settings; Vpn Settings - Yeastar Technology TA400 User Manual

HTTPS web access, it is disabled by default, and you can enable
HTTPS
it to get safer web access.

VLAN Settings

VLAN (Virtual Local Area Network) is a group of hosts with a common set of
requirements, which communicate as if they were attached to the same broadcast
domain, regardless of their physical location.
A VLAN is a broadcast domain created by switches. This means the VLAN is
configured on switches, layer 3 switches. Note that some of the switches don't
support VLAN.
Note:
TA400/800 acts as a VLAN client, a 3-layer switch is needed.
Please follow the steps below to set up VLAN on TA400/800.
Step1. Create VLANs on your switch.
Step2. Allocate a VLAN ID and IP address for TA400/800.
Step3. Configure VLAN settings page on TA400/800.

VPN Settings

A virtual private network (VPN) is a method of computer networking typically using the
public internet that allows users to privately share information between remote
locations, or between a remote location and a business' home network. A VPN can
provide secure information transport by authenticating users, and encrypting data to
prevent unauthorized persons from reading the information transmitted. The VPN can
be used to send any kind of network traffic securely. TA400/800 supports OpenVPN.
Figure 9-5 VLAN Settings
TA400/800 User Manual
40/64