Packet Tool
This feature is used to capture packets for technician. Integrate packet capture tool
―Wireshark‖ in TA400/800. Users also could specify the destination IP address and
port to get the packets.
IP
Specify the destination IP address to get the packets.
Port
Specify the destination Port to get the packets.
Port Monitor Tool
This tool is used to debug a FXS port. Select a FXS port and click ―Start‖ to monitor
the FXS port, stop monitoring by clicking ―Stop‖ button.
Figure 13-2 System Logs
Figure 13-3 Packet Tool
Figure 13-4 Port Monitor Tool
TA400/800 User Manual
64/64