Redrive Assembly Removal - Lexmark MS510 Service Manual

Redrive assembly removal

1
Remove the right cover. See
2
Remove the left cover. See
3
Remove the rear door and cover. See
4
Remove the top cover. See
5
Disconnect the cable JNRW1 from the controller board.
6
Remove the two screws (A), and then detach the reverse solenoid.
Note: Do not disconnect the reverse solenoid cable from the controller board.
"Right cover removal" on page
"Left cover removal" on page
"Rear door and cover removal" on page
"Top cover removal" on page
Repair information
260
194.
181.
257.
264.
A
4514-6xx