Control Panel Assembly Removals - Lexmark MS510 Service Manual

5
Remove the six screws (D) securing the nameplate.

Control panel assembly removals

Control panel assembly removal (MS510dn and MS610dn)
1
Remove the right cover. See
2
Remove the nameplate. See
3
Remove the bezel. See
4
Remove the screw (A) securing the ground connector to the controller board.
"Right cover removal" on page
"Nameplate removals" on page
"Bezel removals" on page
Repair information
D
194.
216.
214.
A
218
4514-6xx