Duplex Service Check - Lexmark MS510 Service Manual

23y paper jam messages
Error code Description
230.01 Sheet covering internal duplex sensor during warm
up.
230.02 Paper jam around internal duplex.
230.03 Internal duplex sensor never made by leading edge of
page.
230.04 Page in duplexer ahead of current reversing page
never staged.
230.05 Internal duplex sensor never broke on the trailing
edge of the sheet.
230.07 Internal duplex sensor never broke from sheet ahead
of page.
230.09 Page in duplexer never picked.
230.10 Narrow page reversing into duplexer.
230.28 Bouncy duplex sensor never made.
232.03 Input sensor never detected sheet from internal
duplex path.
232.10 Feed error picking from the duplexer.

Duplex service check

Action
Step 1
a
Remove the rear cover. See
page 257.
b
Check the redrive rollers for wear or damage.
Are they free of wear or damage?
Step 2
a
Remove the left cover. See
b
POR into the Diagnostics menu and perform a duplex feed test:
Diagnostics Menu > Duplex Tests > Duplex Feed 1
c
Check the reverse solenoid for proper operation.
Does it function properly?
Step 3
a
Remove the input tray.
b
From under the printer, check the duplex gear assembly and duplex
link for wear and damage.
Are the they free of wear and damage?
"Rear door and cover removal" on
"Left cover removal" on page
Diagnostic information
Action
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Yes
Go to step 2.
Go to step 3.
181.
Go to step 4.
61
4514-6xx
61.
61.
61.
61.
61.
61.
61.
61.
61.
61.
61.
No
Replace the redrive
assembly. See "Redrive
assembly removal" on
page 260.
Replace the reverse
solenoid. See "Reverse
solenoid removal" on
page 190.
Replace the duplex
gear assembly. See
"Duplex gear assembly
removal" on page
192.