Appendix A: Printer Specifications; Product Power Consumption; Electrical Specifications - Lexmark MS510 Service Manual

Appendix A: Printer specifications

Product power consumption

The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description
Printing The product is generating hard‑copy output from electronic inputs.
Copy The product is generating hard‑copy output from hard‑copy original documents. NA
Scan The product is scanning hard‑copy documents.
Ready The product is waiting for a print job.
Sleep Mode The product is in a high‑level energy‑saving mode.
Hibernate The product is in a low‑level energy‑saving mode.
Off The product is plugged into an electrical outlet, but the power switch is turned
off.
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. See

Electrical specifications

Low-voltage models
• 100 to 127 V ac at 47 to 63 Hz nominal
•
90 to 137 V ac, steady state operational extremes
High-voltage models
• 220 to 240 V ac at 47 to 63 Hz nominal (not available in all countries)
•
198 to 254 V ac, steady state operational extremes
www.lexmark.com for current values.
Appendix A: Printer specifications
303
4514-6xx
Power consumption
(Watts)
600 (MS510dn); 640
(MS610dn, MS610de)
NA
9
5
1
0