Lexmark MS510 Service Manual page 57

3
Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4
Close the rear and front doors.
5
From the printer control panel, press
202 paper jam messages
Error code Description
202.01 Exit sensor is covered during warm up.
202.03 Media did not reach the fuser exit sensor.
202.05 Exit sensor covered too long or exit sensor did not
clear ahead of a sheet.
to clear the message and continue printing.
Action
Go to
page 58.
Go to
page 58.
Go to
page 58.
Diagnostic information
57
"Sensor (fuser exit) jam service check" on
"Sensor (fuser exit) jam service check" on
"Sensor (fuser exit) jam service check" on
4514-6xx