Lexmark MS510 Service Manual page 50

200 paper jam messages
Error code Description
200.01 Input sensor covered during warm-up sequence.
200.02 Input sensor covered too quickly.
200.03 Page did not reach input sensor or was late reaching
input sensor, but was successfully picked from the
source.
200.05 Input sensor covered too long. Source = [x].
200.08 Page arrive at input senor at unexpected time.
200.09 Printhead did not receive proper motor feedback to
start laser servo.
200.10 Printhead motor not locked when media reaches the
input sensor.
200.11 Printhead motor fell out of lock after page reaches the
input sensor.
200.12 Printhead was not ready for media.
200.13 Media at input sensor is not the next media to be
imaged.
200.14 Media reached the input sensor before EP was ready. Go to
200.15 Input sensor covered too long. Source = [x].
200.16 Fuser motor stalled.
200.21 No response from paper port driver while waiting for
the source to deactivate the Input Source Ready flag
to indicate it has initiated picking.
200.23 Laser servo never started due to potential conflict
with the transfer servo.
200.24 Measured gap at input sensor too small to meet video
delivery requirements. (Not enough time since prior
image finished to start new image).
200.25 Input sensor covered too long. Source = [x].
200.29 Printhead drive control out of range due to an
external event beyond what the control is designed
to handle.
Action
Go to "Sensor (input) static jam service check" on
page 51.
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) image jam service check" on
page 53.
Go to "Sensor (input) image jam service check" on
page 53.
Go to "Sensor (input) image jam service check" on
page 53.
Go to "Sensor (input) image jam service check" on
page 53.
Go to "Sensor (input) image jam service check" on
page 53.
"Sensor (input) image jam service check" on
page 53.
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Main drive motor control jam service check"
on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) image jam service check" on
page 53.
Go to "Sensor (input) image jam service check" on
page 53.
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) image jam service check" on
page 53.
Diagnostic information
50
52.
52.
52.
52.
52.
54.
52.
52.
4514-6xx