Removal Procedure
8.7
Removal of Fan Motor
Warning
Step
1. Removal of the fan
motor
Remove the nut (M13)
1
and pull out the sirocco
fan.
Pull the harness
2
retainer toward
yourself, and lift it up to
remove.
3
Remove the 3 screws
from the fixing plate.
4
Take out the fan motor.
88
Be sure to wait 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Sirocco fan
A
Harness
retainer
Loosen
M13
(Double spanner 10mm)
Washer
(R9834)
Fixing
plate
B
(R9835)
Fan motor
(R9836)
SiBE81-909
Points
★
When assembling, put part A
first in the groove, and then
slide part B along the way.
★
When assembling, make
sure that the harness is not
too tight or caught in A.
★
The motor and the harness
are integrated together.
★
Make sure no washers are
left behind the fan.
Humidifying Air Purifier